ESE00538-ENUS4 2018-12
Original manual
Spare Parts
Unique SSV - maintainable actuator
Table of contents
The information herein is correct at the time of issue but may be subject to change without prior notice
1. Important information ................................................................................ 4
2. Maintainable actuator ................................................................................ 6
3. High pressure maintainable/non-maintainable actuator ....................................... 8
4. Mounting tool .......................................................................................... 10
3
1Importantinformation
Different actuator types for the SSV valve
In June 2016 the below change was implemented and the “removable yoke with bolts“ version is thereby phased out and
replaced by the “yoke without bolts“ version.
NOTE
It is important t
o check for warnings marked on the actuator when servicing an actuator - see below table.
Non-maintainable actuator
Spring under load and
CANNOT be opened
Fully maintainable actuator
Spring cage and can be
opened
Fully maintainable actuator
Spring cage and can be
opened
2200-0098
*
DO NOT DISASSEMBLE
kg
!
2200-0096
2200-0097
*) Lock wire opening is locked
when warning is marked on
actuator
Actuator type
Non-remo
vable yoke
“Removab
le yoke with bolts”.
Iftheyokewithboltsis
damaged it has to be replaced
by the “y
oke without bolts”
“Yoke wit
hout bolts”
Yoke type
Not possible to service
internally (it is not possible to
change piston O-rings)
Yes Yes
Service
Yes No No
Marked with warnings
From 2006 From 2006 to June 2016 From June 2016
Year of production
4
Maintainable actuator
If the actuator is marked with a danger warning do NOT attempt to cut the actuator open.
DO NOT DISASSEMBLE
kg
!
SPRING UNDER LOAD
Do not attempt to cut open
kg
!
AND
WARNING
SPRING UNDER LOAD
DO NOT ATTEMPT TO CUT ACTUATOR OPEN
REFER TO SERVICE BULLETIN
!
Do NOT attempt to disassemble the
actuator due to spring under load danger.
Do NOT attempt to cut the actuator
open, due to spring under load danger.
Do NOT attempt to cut the
actuator open, due to spring
under load danger.
5
9
8
6
7
16
10
3
1
2
14
6
8
12
11
7
18
17
13.1
15
12
*
13
2200-0151_1
7
6
8
SSV
*) Removal yoke with bolts version, produced from 2006 to June 2016.
Phased out with yoke without bolts (13)
6
Maintainable actuator
Pos Qty Denomination 1” 1½” 2” 2½” 3” 4”
l
Actuator, complete (NO) .........
l
Actuator, complete (NC) .........
l
Actuator, complete (A/A) .........
11l
Cylinder, blasted .................
1l
Cylinder, polished ................
21l Piston ............................
3
1l
O-ring ............................
5
1l
Adapter, plastic (- 0115) ..........
1l
Adapter, steel (0115 - 0518) .....
1l
Adapter, steel (0518 -) ...........
6
2l Bushing ..........................
7
2l
O-ring ............................
8
2l
O-ring ............................
91l Plug ..............................
10 1l Lock wire .........................
11
1l
O-ring ............................
12
1/2l Air fitting (only2 for A/A) .........
13 1l Yoke, without bolts ...............
14
1l
Spring assembly .................
16
1/2l Supportdisc (only 2 forA/A) .....
Removable yoke with bolts (obsolete) - use position 13
13.1 1l
Yoke (-> 0616) ...................
15 1l
Bottom (-> 0616) .................
17 3l
Washer (-> 0616) .. ..............
18 3l
Nut (-> 0616) .....................
Service kits
1” 1½” 2” 2½” 3” 4”
a
Service kit, NO/NC .............
a
Service kit, A/A .................
Recommended spare parts: Service kits.
Parts marked with
are included in the service kits.
TD 900-362/2
7
High pressure maintainable/non-maintainable actuator
1”-2½”
3”-4”
(maintainable) (non-maintaina
ble)
5
9
8
6
7
16
10
3
1
2
14
11
7
6
8
13
12
2200-0145_1
18
17
13.1
15
12
*
7
6
8
5
9
8
6
7
12
7
6
8
DO NOT DISASSEMBLE
kg
!
SSV
SSV
*) “Removable yoke with bolts” version, produced from 2006-June 2016.
Replaced by “yoke without bolts” (13)
8
High pressure maintainable/non-maintainable actuator
Pos Qty Denomination 1" 1½" 2" 2½"
3”
(Non
maintainable)
4"
(Non
maintainable)
l
Actuator, complete (NO) ....
N/A N/A
l
Actuator, complete (NC) ....
l
Actuator, complete (A/A) ....
N/A N/A
1
1l
Cylinder, (blasted) ...........
1l
Cylinder, (polished) ..........
21l Piston .......................
3
♦
1l
O-ring .......................
5
1l
Adapter, plastic (- 0115) ....
1l
Adapter, steel (0115 - 0518)
1l
Adapter, steel (0518 -) ......
6
♦
2l Bushing .....................
7
♦
2l
O-ring .......................
8
♦
2l
O-ring .......................
91l Plug .........................
10 1l Lock wire ...................
11
♦
1l
O-ring .......................
12
1(2)l Air fitting (only 2 for A/A) ....
13 1l
Yoke without bolts (0616 - )
14
1l
Spring assembly ............
16
♦
1(2)l Support disc (only 2 for A/A)
Removable yoke with bolts (obsolete) - use position 13
13.1 1l
Yoke (-> 0616) ..............
15 1l
Bottom (-> 0616) ...........
17
3l
Washer (-> 0616) ...........
18 3l
Nut (-> 0616) . ..............
1" 1½" 2" 2½"
3”
(Non
maintainable)
4"
(Non
maintainable)
Service kits
a
Service kit, NO, NC ......
a
♦
Service kit, A/A ...........
a
Service kit, NC ...........
Recommended spare parts: Service kits.
Parts marked with
♦ are included in the service kits.
900-478/1
9
Mounting tool
TD 461-916
1
2200-0141
4
10
Mounting tool
Pos Qty Denomination
DN 25-65
25-63.5 mm
DN 80-100
76.1-101.6 mm
1
1l
Service tool for Maintainable actuator .............................
TD 900-512/1
Pos Qty Denomination
DN 25-100
25-101.6 mm
4
1l
Tool for actuator bushing (pos. 6) ..................................
TD 900-701
11
